everlight electronics co., ltd. http://www.everlight.com rev 2 page: 1 of 5 device no.: dpl-133-024 prepared date: 07-25-2005 prepared by: chin-chia hsu technical data sheet photolink- fiber optic transmitter plt133/t6a features ? high speed signal transmission 16mbps nrz signal ? ttl interface compatible ? +3~+5v single power source ? pb free ? the product itself will remain within rohs compliant version. descriptions the opto-electrical component is assembled with a 660nm algainp led and a driver ic. it transforms the electrical signal to optical signal and be transmitted by 1mm diameter plastic optical fiber. the component is operated at +3~+5v and has good performance at low dissipation current, steady light output and efficient light coupling. applications ? digital audio equipment ? cd player ? dvd player device selection guide chip dissipation current (ma) fiber coupling light output (dbm) material p(nm) operating voltage (vcc) typ. max. min. typ. max. algainp 660 +3.0~5.0 5.5 10 -21 -- -15
everlight electronics co., ltd. http://www.everlight.com rev 2 page: 2 of 5 device no.: dpl-133-024 prepared date: 07-25-2005 prepared by: chin-chia hsu plt133/t6a package dimensions notes: 1.all dimensions are in millimeters. 2.general tolerance : 0.3mm 3. cover color gray using method pcb layout for electrical circuit notes: 1. unit:mm 2.dimension tolerance: 0.25mm 3.substrate thickness:1.6mm optical output side 3 2 1 vin vcc c l =0.1uf 7mm gnd
everlight electronics co., ltd. http://www.everlight.com rev 2 page: 3 of 5 device no.: dpl-133-024 prepared date: 07-25-2005 prepared by: chin-chia hsu plt133/t6a absolute maximum ratings( ta = 25 oc ) parameter symbol rating unit supply voltage vcc -0.5 to 7 v dc input voltage vin -0.5 to vcc+0.5 v storage temperature tstg -40 to 85 oc operating temperature topr -20 to 70 oc soldering temperature tsol 260* oc * soldering time 10 s. electro-optical characteristics parameter symbol conditions min. typ. max. unit operating voltage vcc low voltage 2.75 3.00 3.25 v high voltage 4.75 5.00 5.25 v peak emission wavelength p 640 660 680 nm transmission rate nrz code dc - 16 mbps fiber coupling output power pf *1 -21 -18 -15 dbm dissipation current icc *1 3 - 10 ma high level input voltage v ih 2 - - v low level input voltage v il - - 0.8 v low to high delay time t plh *2 - - 120 ns high to low delay time t phl *2 - - 120 ns pulse width distortion ? tw *2 -25 - 25 ns jitter ? tj *2 - - 20 ns *all plastic optical fiber 980/1000um *circuit layout notice: when power is off, it must be cut off together in vin and vcc pin. if it only has vcc power-off, led will be sparkling because led is just threshold condition.
everlight electronics co., ltd. http://www.everlight.com rev 2 page: 4 of 5 device no.: dpl-133-024 prepared date: 07-25-2005 prepared by: chin-chia hsu plt133/t6a measuring method *1 measuring method of optical output coupling fiber and dissipation current plt133 transmitter unit standard plastic optic fiber cable gnd vcc vin 0.1uf 5v signal input dc optical power meter advantest q8221 the optical power meter must be calibrated to have the wavelength sensitivity of 660nm ( 0 dbm = 1mw) icc *2 pulse response measuring method standard plastic optic fiber cable 16mbps nrz "0101" successive signal input standard receiver unit ch2 ch1 50% t t input tj1 output tj2 50% t w = t phl -t plh phl plh 5v 0.1uf plt133 transmitter unit vin vcc input signal gnd
everlight electronics co., ltd. http://www.everlight.com rev 2 page: 5 of 5 device no.: dpl-133-024 prepared date: 07-25-2005 prepared by: chin-chia hsu plt133/t6a reliability test items test sample size number (n) no. item test condition hour/cycle (piece) failure (c) 1 soldering heat 260 oc 5 oc 10 seconds 22 n=22, c=0 2 high temp. storage ta=100 oc 1000hrs 22 n=22, c=0 3 low temp. storage ta=-55 oc 1000hrs 22 n=22, c=0 high temp. & 4 humid. test ta=85 oc , rh=85% 1000hrs 22 n=22, c=0 -40 oc ~~~~ 85 oc 5 temperature cycle (30min) (5min) (30min) 300cycle 22 n=22, c=0 -10 oc ~~~~ 100 oc 6 thermal shock (5min) (10sec) (5min) 300cycle 22 n=22, c=0 vcc=5v, ta=25 7 dc operating life vin: dc (5v) 1000hrs 22 n=22, c=0 *icc(ma): brightness attenuate difference 20% *pf (fiber coupling output power) brightness attenuate difference < 20% everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiwan, r.o.c http://www.everlight.com
|
